PixelPro GXi Series
ZS1-4DB2 Installation Guide
09-2014-A
11
RS-485
The RS-485 serial port consists of TRX+(RX+) and TRX-(RX-) as following the following image.
RS-485 Connection
4.2.Ejecting and inserting blades
4.2.1. Ejecting a blade
1. Unscrew the screws.
2. Grasp the inject/eject handle of the blade and push it down as shown in above figure.
3. Remove the blade from the rack chassis.
4.2.2. Inserting a blade
1. Make sure that the inject handle is in the outward position.
2. Insert the blade into the rack chassis.
3. Grasp the inject handle of the blade and pull it up.
4. Fasten the screws.
485 Device
screw
screw