⑪
Sensor input
⑫
Relay / RS-
485
⑬
DC Adaptor
Camera Connection
Initial Setup
-Auto(using the PoE Port) Mode-
To two ways to connect to NVR camera.
Case 1. As shown above, can be connected to PoE ports. (up
to 8ch)
Without a separate set of cameras can operate in NVR.
Automatically to connect the network video recorder after
setting the IP address.
For further information, please refer to the manual.
-Manual(Using the local or ethernet ports) Mode-
Case 2. As shown above, it the camera and the recorder
when is connected to the same hub is to connect.
Separate camera settings are required.
From 9 to 16 channel is used to connect.
For further information, please refer to the manual.
-START SETUP-
When you turn on at first time you can see the below menu.
SYSTEM LANGUAGE: Select the system language.
SYSTEM TIMEZONE: Select the system time-zone.
DATE FORMAT: Select the date format
VIDEO SIGNAL FORMAT: Select the video signal type
VIDEO OUTPUT RESOLUTION: Select the video output
resolution
