DIMENSIONS
EFFECTS
: Adjusts various effect options.
DZOOM MODE : Digitally zooms a desired section of the image.
IMAGE FREEZE : Holds the image displayed on screen.
D-EFFECT : Masks out strong backlighting to produce a clearer image.
VERTICAL FLIP
: Flips the images along the x-axis.
MIRROR : Flips the image along the y-axis.
ROTATE : Rotates the image.
CONTRAST : Sets the contrast of the image.
SHARPNESS : Sets the amount of sharpness applied on the image.
COLOR ADJUST : Used to tune the general color of the image.
COLOR
: Toggles the color on or off.
COLOR LEVEL
: Sets the color level of the image; the higher the level the
stronger the color.
COLOR HUE
: Sets the hue of the image.
RED GAIN
: Sets the amount of red gain applied on the image.
BLUE GAIN
: Sets the amount of blue gain applied on the image.
SPECIAL
: Adjusts various special options.
MOTION DET : Adjust motion detection settings. There is a initialization period of
~15sec.
*Requires the alarm relay option.
ZONE NUMBER
: Selects the current motion zone.
ZONE STATE
: Toggles the motion zone on or off.
WIDTH
: Sets the width of the motion zone.
HEIGHT
: Sets the height of the motion zone.
MOVE X
: Moves the motion zone horizontally.
MOVE Y
: Moves the motion zone vertically.
SENSITIVITY
: Adjusts the sensitivity of motion detection.
PRIVACY MASK : Used to hide regions of the image.
MASK NUMBER
: Selects the current mask number
MASK STATE
: Toggles the mask on or off.
MASK COLOR
: Selects the desired mask color.
WIDTH
: Sets the width of the mask.
HEIGHT
: Sets the height of the mask.
MOVE X
: Moves the mask horizontally.
MOVE Y
: Moves the mask vertically.
LANGUAGE : Sets the desired OSD language.
(ENGLISH, GERMAN, SPANISH, FRENCH, RUSSIAN, POLISH).
STABILIZER : Used to digitally stabilize an image effected by wind/vibration.
L/L SYNC : Sets the desired line lock method.
INT
: Uses the internal system to synchronize a line lock.
L/L
: Uses the power signal to synchronize a line lock.
*Requires the dual
voltage option.
MONITOR TYPE : Sets the video output to three main input types.
CRT
: Best used for CRT monitors.
LCD
: Best used for LCD monitors.
LIN
: Best used for input types that require no gamma correction.
FACTORY RESET : Resets all settings to it’s factory defaults.
COMM SET : Used to configure the RS-485 port.
*Requires the RS-485 option.
PROTOCO
L : Only 1 protocol supported at the moment (Pelco-D)
CAMERA ID
: Sets the ID for the RS-485 (0~255).
BAUD RATE
: Sets the baud rate for the RS-485 (4800~57600).
SAVE/REBOOT
: Activates the new settings and reboots the camera.
CAM NAME
: Adjusts camera title settings.
OFF : The camera name will not be displayed onscreen.
ON :
Press [Set] to access the submenu.
Enter the desired camera name, select [POS] to select the desired position,
then select [END] to exit and apply the changes.
LENS
: Controls various settings related to the lens.
DC IRIS : Used with DC auto iris lens.
BRIGHTNESS
: Adjusts image brightness.
REACTION SPEED
: Adjusts the iris reaction speed.
MANUAL : Used with manual lens.
BRIGHTNESS
: Adjusts image brightness.
EZ FOCUS : Temporary mode used to focus the lens.
EXPOSURE
: Adjusts exposure settings.
AGC : Adjusts the AGC level.
SHUTTER : Sets the desired shutter option.
SENS-UP : Sets the desired multiple of the digital exposure length.
LOW LIGHT GAIN : Sets the amount of digital gain to use within the system.
DAY / NIGHT
: Adjust Day / Night options.
AUTO : Automatically determines the D/N switching points.
D/N LEVEL
: Adjusts the switching point level.
DWELL TIME
: Adjusts the calculation time for the trigger.
NIGHT BURST
: Enables night burst when in B/W mode.
COLOR : Color mode.
B/W : B/W mode.
CDS : Uses the CDS sensor to determine the switching point (IR Products)
LSC MODE
: Toggles the LSC mode on or off.
LSC LEVEL
: Adjusts the intensity of the LSC mode.
WDR / BLC / HLC
: Adjusts backlight options.
WDR : Uses a true wide dynamic range algorithm to balance dark and over saturated
areas within the image.
WDR LEVEL
: Adjusts the WDR level.
BLC : Produces a clearer image of an object darkened by strong backlighting.
BLC LEVEL
: Adjusts the BLC level.
HLC : Masks out strong backlighting to produce a clearer image.
AREA SETTING
: Sets which areas will be active for the HLC feature.
ALL AREA SET
: Sets all areas active.
MASK COLOR
: Sets the desired color of the masked area.
HLC LEVEL : Adjusts the level of masking.
GAIN CONTROL : Sets when the HLC will be active.
WHITE BAL
: Adjusts white balancing options.
ATW1 : Automatically white balances the image.
ATW2 : Automatically white balances the image and compensates for some color
rolling.
AWC-SET : Press [SET] to white balances the image to a specific light environment.
This mode will not adjust to a new light environment.
MANUAL : Select ATW1 or AWC-set then enter the MANUAL white balancing mode to
manually adjust the scene to your desired settings.
3D-DNR
: Reduces the background noise caused by the digital enhancement
of a low light environment. If AGC is turned OFF, the 3D-DNR will be disabled.
DNR LEVEL : Sets the level of noise reduction; the higher the level the less the noise.
DNR BLACK LEVEL : Sets the low light environment black level; the higher the level the
brighter the image. Please note that decreasing the DNR BLACK LEVEL too
much will result in the low light
GLOBAL MOVEMENT: Used to reduce a trailing effect caused by motion.
OSD MENU FUNCTIONS
ITEM
600TVL WDR CAMERA
Power Source
DC 12V
Image Sensor
1/3” SONY SUPER HAD CCD II (ICX638/639BK)
Total Pixels
811(H) x 508(V) (NTSC) , 795(H) x 596(V) (PAL)
Effective Pixels
768(H) x 494(V) (NTSC) , 755(H) x 582(V) (PAL)
Scanning System
2 : 1 Interlace
Synchronization
Internal / Line Lock
H. Resolution
600 TV Line
Min. Illumination
0.05Lux([email protected])
0.0001Lux (Sens-Up x 512)
S/N (Y signal)
52dB (AGC Off, Weight On)
On Screen Display
Built-in
AGC
OFF | LOW | MIDDLE | HIGH
Shutter
OFF | A.FLK | 1/160 ~ 1/90000 | x2 ~ x512 | AUTO
SENS-UP
OFF | AUTO (x2 ~ x512)
DAY / NIGHT
AUTO | COLOR | B/W | CDS
WDR
ON | OFF (Level Adjustable)
More than 72dB with Dual Channel Operation
BLC
ON | OFF (Level Adjustable)
HLC
(Area Selectable, Level Adjustable)
White Balance
ATW1 | ATW2 | AWC-SET | MANUAL
(Color Temp. 2300K~16000K)
3D-DNR
ON | OFF Level Adjustable (3D Filtering System)
EFFECTS
DZoom Mode | Image Freeze | D-Effect | Contrast |
Sharpness | Color Adjust
Motion Detection
ON | OFF (8 Programmable Zone)
Privacy Masking
ON | OFF (8 Programmable Zone)
Stabilizer
ON | OFF (Digital Image Stabilizer)
Miscellaneous
L/L, Monitor Type, Multi-Language OSD
Operational Temp.
-10
℃
~ +50
℃
/ Max 95% RH
Storing Temp.
-20
℃
~ +60
℃
/ Max 95% RH
SPECIFICATIONS
Front
Side
40mm
36mm
36mm
91mm
58mm
