Infrared Bullet Network Camera
User Manual
3
Device Installation
Issue V1.0 (2016-02-22)
7
Figure 3-2
Install the positioning label
Step 4
Aim the four holes of the bottom cover at the white plastic buttons, use the white
stainless self-tapping screws with 27mm to fix the camera onto the wall, as shown in
Figure 3-3.
Figure 3-3
Install the camera
Step 5
Loosen the bracket locking ring and screw, adjust the position so that the camera faces
the monitored area, then tighten the bracket locking ring and screw, use the L-wrench
to fix the locking screw, as shown in Figure 3-4.