Gantom iQ and iQx User Guide
Version 1.0 – 2/3/2017
CONTROL SCREEN
o
Address
– This box shows the address that will be
assigned to the fixture if you hit the “Assign Address”
button
o
Assign Address
– Hitting this button will assign the
selected address to the fixture. The light fixture should
blink in response to having a new address assigned.
o
Save button
– this will allow you to save a settings
profile into the app. Use this if you need to configure
many fixtures to have the exact same settings. Please
note that this button DOES NOT save the current profile
or address to the fixture.
o
Control Sliders
– the control sliders will allow you to
set the intensity (brightness) of the light as well as the
speed of whichever pre-defined macro effect is selected.
Setting the “Speed” slider above 0% will start a strobe
effect with variable speed if no effect has been selected.
o
Store as Default
– hitting this will save the current
brightness and pre-defined macro effect to be the
default state for the light when it turns on. If the light
does not see DMX signal when it is powered on, it will go
to this state.
o
Pre-Defined Macros
– Selecting this button will bring
up a set of pre-made special effects like strobe, pulse,
and flicker.
