Gantom DMX User Guide
Version 1.2 – 7/21/2017
DMX CHANNEL MAPPING
POWER AND WIRING REQUIREMENTS
The Gantom DMX has a maximum fixture wattage of 4.8W and an operating voltage of 12V DC. For
recommended power supplies check
http://www.gantom.com/power-supplies/
Rather than using a typical XLR cable for carrying the DMX signal, Gantom DMX
fixtures use 3.5mm TRS cables. Gantom makes the an XLR 5 Pin to 3.5mm TRS
adapter (product number CB51) that is perfect for connecting into an XLR based
DMX environment.
Additionally, screw terminal adapters are
included with every fixture to simplify
custom wiring. You can screw bare wires
directly into these adapters.
BARE WIRE PINOUT
Power
+
RED
-
BLUE
DMX signal
D+
GREEN
D-
YELLOW
COM
BLACK
