Gantner GAT Vending 6100 BA, Installation, Configuration & Operation

Page: 30 / 48

GAT Vending 6100 BA
Startup and Configuration
30
HB_GAT-VENDING6100BA--EN_121
www.gantner.com
To configure the display texts of the GAT Vending 6100 BA, click on the "Display Texts" tab. Here you can edit each
individual message that is displayed on the selected terminal (see "5.3.3. Display Texts").
Click on the "(2) Configure" button to view and adjust the configuration settings of the GAT Vending 6100 BA. The
existing configuration is uploaded from the terminal and displayed in the configuration window. See Figure
5.16 in
the previous section for more information on the configuration window.
5.3.3 Display Texts
The texts that are shown on the display of a GAT Vending 6100 BA can be edited in GAT Config Manager.
Complete the following steps to edit the display texts.
► In the project window, select the GAT Vending 6100 BA from the project tree.
► Click on the "Display Texts" tab.
o
GAT Config Manager loads the data from the device and displays them in the project window.
Figure 5.20
– Display texts