3.5
The green control light on the control panel indicates that the machine is ready to work.
3.6
Starting the motor also starts the vacuum, the main brush and the side brush.
4. Instructions for use:
4.1
By the use of the right handle-grip on the driving handle the machine will start to move forwards, the
steering direction is controlled by the driving handle. This forwards movement can be regulated with the
right-handle grip from 0 - max. 4 km/h. When driving curves the speed can be reduced by releasing
pressure on the right-handle-grip.
4.2
Floors should be cleaned in parallel strips which should overlap by ca. 3 - 5 cm. The fitted side brush will
easily work close to borders. When the side brush receives light pressure it will automatically move
inwards and on removal of the pressure will return to the wider position.
4.3
By means of the vacuum, generated above the dirt container, the dust created by the sweeping process
is drawn to the filter, which is positioned above the dirt container. Therefore the driver and other
participants are not irritated by a cloud of dust.
4.4
If dust suction is decreasing, the filter clogged up with the dust being extracted. In this case the operator
must shake off the dust from the filter. To do so, release plastic section from above the dirt container to
interrupt the vacuum. The fine dust then easily falls into the dirt container.
The filter is operated as follows: The filter shaker is activated by pulling and releasing the knob on the
operators panel. This procedure will be repeated 3 - 5 times in steps of some seconds. Remember, that
- 5 -
