Gansow 31 B 46, Service Manual

Page: 7 / 78

ENGLISH 7
3.6. Light pressure and a slight sideways movement of the pedal release
the brushes which are lowered in contact with the ground.
3.7. To activate brush rotation, press the corresponding button on the left
side of the control panel.
MACHINES WITH DIAPHRAGM: Pressing this button opens the
water solenoid valve and turns the water pump on.
Turn the knob on the control panel clockwise to adjust the
quantity of water to the brushes (from 0 to 7 litres).
MACHINES WITHOUT DIAPHRAGM: Pressing this button opens the
water solenoid valve.
To adjust the quantity of water to the brush in accordance with
the dirt to be removed (more dirt=more solution), use the red
lever at the bottom on the operator's right. When the lever is
horizontal, the cock is fully open, when vertical it is completely
closed.
3.8. Lower the squeegee to the ground, using the control lever in front of
the operator under the handle.
3.9. Turn on suction to convey the dirty water to the collection tank, using
the button marked with a fan on the right of the control panel.