Standalone MMC Control
30
MMC Hardware Manual
G & L Motion Control Inc.
•
MMC-A4 Plus (2 1/2 axis analog servo control, expandable)
•
MMC-S8 (8 axis SERCOS control)
The PiCPro programming tool used with the PiC family of controls is also
used to program the MMC. The built-in I/O [28 inputs (24 VDC) and 16
outputs (24 VDC)] can be expanded using G&L Motion Control serially
distributed block I/O. There are also eight (four) low current DC and four
(two) DC inputs on the Axis connectors of the MMC-A4 and MMC-A2.
Field-installable options for the MMC include an Ethernet TCP/IP interface,
a DeviceNet™ master interface, a Profibus module, a 4-channel Analog
Output Module, and a 32 In/32 Out I/O Module.
4.4
Major Components
The major components of an MMC Control include a Machine Control board
and a Motion Control board contained within a metal enclosure. External
connections for the boards are located on the face of the enclosure.
Add-on modules are also available to expand the MMC Control:
•
A maximum of two MMC Expansion Modules may be added to
the MMC-A2 and MMC A-4:
•
Communications Option Modules (Ethernet, Profibus, or
DeviceNet).
•
32 In/32 Out DC I/O Option Modules.
•
A maximum of four MMC Expansion Modules may be added to
the MMC-A2 Plus and MMC A-4 Plus:
•
Up to two MMC Communications Option Modules (Ether-
net, Profibus, or DeviceNet).
•
Up to four MMC Axis I/O Option Modules.
•
Up to four MMC 32 In/32 Out Option Modules.
Summary of Contents for MMC-A2
