G&K HK-Controller 20, Installation And Operation Manual

Page: 21 / 36

Introduction
G&D HK-Controller 20 · 2
Introduction
The add-on HK-Controller 20 enables you to comfortably transmit key actions to a
compatible G&D device.
You can connect a panel with up to 23 buttons to the 25 contacts of the D-Sub25
socket. Each button is connected to one of the 23
potential-free
button inputs of the
D-Sub25 socket (see Pin assignment of the D-Sub25 socket on page 13).
After you program the inputs of the add-on with the connected keyboard or the sup-
plied software HK-20 Button Configurator , you can press a panel button to send the
stored key actions to the G&D device.
Package contents

1 × Add-on
HK-Controller 20

1 × Software
HK-20 Button Configurator
incl. documentation on CD

1 × USB service cable (
USB-Service-2
)

1 × USB connection cable (
USB-AM/BM-2
)

1 × PS/2 connection cable (
PS/2-M/M-2
)

1 × on one side converted cable to connect the panel ( HK-SUBD25-M/open-1,8 )
 1 × 12V portable power pack
 1 × Power cable ( PowerCable-2 Standard )
 1 × Manual
IMPORTANT: The panel to operate the add-on is not included in the package contents.