Installation
13
· G&D VisionXS-IP-F-DP-UHR
Installing console modules
The remote console is connected to the
VisionXS-IP-CON
console module. The com-
puter connected to the computer module can be operated from this console.
Establishing a connection to a local management network
Network:
Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
NOTE:
All device variants of the
VisionXS-IP
series can be operated with an
external
power supply at the
Power
interface (for DT variants:
Main Power
).
The illustrations in this chapter show the DT variant of the device series. This
variant is additionally equipped with an
internal
power supply (
Red. Power
).
NOTE:
If desired, connect this network interface to a local network. This enables
you to access the
Config Panel
web application from this network and to send sys-
log messages to this network.
Pwr Main Power
Red. Power
Network
Service
Transmission 2
Transmission 1
Pwr Main Power
Red. Power
Service
Transmission 2
Transmission 1
Summary of Contents for VisionXS-IP-F-DP-UHR
