Configuration
49
· G&D VisionXS-F-DP-UHR
Reinitialising USB input devices
Once you connect a USB keyboard or mouse to the KVM extender, the input device
is initialised and can be used without restrictions.
The USB connection of some USB input devices needs to be reinitialised after a cer-
tain time. Activate the automatic reinitialisation of the USB input devices if a USB
keyboard or mouse no longer reacts to your inputs during operation.
How to enable/disable reinitialisation of USB input devices:
OSD
1. Press
Ctrl+Num
(
default
) to open the on-screen display.
2. Select the row
Console setup
and press
Enter
.
3. Under
USB auto refresh
press
F8
to select one of the following options:
only faulty
The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (
default
).
all
The status of the USB devices is monitored.
If communication to one USB device is interrupted, all
devices are reinitialised.
off
The status of the USB devices is
not
monitored.
If communication to a USB device is interrupted, the
device is
not
reinitialised.
4. Press
F2
to save your settings.
Summary of Contents for VISIONXS-F-DP-UHR Series
