G&D VISIONXS-CON-F-DP-UHR-AR-DT, Installation & Operation Manual

Page: 135 / 164

Configuration
G&D VisionXS-F-DP-UHR · 50
English
Config
Panel
1. In the menu, click on
KVM extender
.
2. Click twice on the user module (
CON-Trans 1
or
CON-Trans 2
) you want to con-
figure.
3. In the
USB auto refresh
field of the
Configuration
section, select one of the fol-
lowing options:
Only faulty devices
 The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (
default
).
All devices  The status of the USB devices is monitored.
If communication to one USB device is interrupted,
all devices are reinitialised.
Off
 The status of the USB devices is not monitored.
If communication to a USB device is interrupted, the
device is not reinitialised.
4. Click on
Save
.