G&D VisionXS-C-DP-UHR, Installation And Operation Manual

Page: 176 / 212

Configuration
66 · G&D VisionXS-C-DP-UHR
Activating a console after the permanent switch-off of the
image display
When selecting the Image display option keep off / Permanently off (see page 65 f.) the dis-
play is only switched on again after the time period of the input lock has elapsed
after a user input.
In the standard setting, inputs via both keyboards and mouse cause the display to be
switched on. Alternatively, you can allow only keyboard or only mouse as triggers to
activate the display of a console.
How to select the valid input device(s) to trigger the activation of a console:
Related topics:

Changing the time span of the input lock on page 63

Right for exclusive access to the console on page 64
IMPORTANT:
The activation of the Transm. Redundancy feature and the connection
to a second console module are prerequisites for this operation option.
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Select the row System setup and press Enter .
3. Under Activation select one of the following options:
 keyb./mouse ( default )
 keyboard only
 mouse only
4. Press F2 to save your settings.