G&D VisionXS-C-DP-UHR, Installation And Operation Manual

Page: 174 / 212

Configuration
64 · G&D VisionXS-C-DP-UHR
Right for exclusive access to the console
If no inputs are made at the active console during the adjusted time span of the auto-
matic input lock ( default : 1 second), the default settings of the KVM extender permit
the other console to operate the extender.
If the function right for exclusive console access is activated in the web application,
you are able to operate the KVM extender exclusively by pressing the hotkey Hot-
key+Print ( default : Ctrl+Print ).
Pressing this key combination deactivates the input devices of the concurrent con-
sole. By pressing the key combination again at the active console, both consoles can
operate the KVM extender again.
How to select the right to exclusively operate a console:
Related topics:
 Operating the KVM extender exclusively on page 18
 Changing the video mode of consoles on page 65
IMPORTANT:
The activation of the Transm. Redundancy feature and the connection
to a second console module are prerequisites for this operation option.
NOTE:
After the exclusive operation of the KVM extender has been activated at a
console, the Caps Lock , Num and Scroll Lock LEDs are blinking alternately at the
keyboard of the locked console.
The blinking
Scroll Lock LED at the active console indicates that the exclusive
operation of the KVM extender is activated.
OS
D 1. Press Ctrl+Num ( default ) to open the OSD.
2. Select the row Console setup and press Enter .
3. Under Enable exclusive press F8 to select on of the following options:
yes  right for exclusive access is granted ( default )
no  right for exclusive access is denied
4. Press F2 to save your settings.