Initiation
G&D miniMUX2 ·
8
Initiation
After the KVM switch has been installed (see
on page 4 ff.), it can be
operated immediately.
Status displays
The LEDs on the front panel of the device enable you to control the operational status
at all time:
Section
LED
Status
Meaning
CPU 1 … 2
Active
on
The KVM switch is currently active on this channel.
All inputs are transmitted to this computer
.
off
The channel is currently inactive.
Status
on
The computer is ready for operation.
off
No computer connected or the computer is turned off.
User
Active
on
The keyboard was properly initialised.
blinking
The LED is blinking after the device has been turned on
and until the keyboard has been initialised.
Status
on
The KVM switch is supplied with the necessary voltage.
off
The KVM switch is turned off or the necessary voltage
cannot be supplied. If necessary, check the proper con-
nection of the power pack.
Summary of Contents for miniMUX2
Page 70: ...NOTES ...
Page 71: ...NOTES ...
