Power supply via power loop cables
14
· DVI-FiberLink
Power supply via power loop cables
If the external power pack connected to the
Power In
interface supplies the expansion
module with power, power loop cables can be used to supply up to four other expan-
sion modules with power.
1. Connect the external power pack
to one of the expansion modules.
2. Insert a Power Loop cable
into the
Power Loop
interface of the expansio mod-
ule. Connect the other end to the
Power In
interface of the next expansion mod-
ule.
3. If desired, repeat step 2 to establish the power supply to the third, fourth or fifth
expansion module.
