Initial configuration of the network settings
G&D DP1.2-Vision-IP-Fiber ·
39
English
Checking the availability of a host in the network (Ping)
The OSD can be used to test the availability of a particular host (e. g., a computer or
a network device) in the network.
How to check the availability of a host in the network:
1. Open the remote OSD of the computer module by pressing the
remote hotkey
(
default
:
Ctrl+Num
), if you want to change the configuration of the computer mod-
ule.
Open the local OSD of the console module by pressing the
local hotkey
(
default
:
Alt+Num
), if you want to change the configuration of the console module.
2. Select the row
Network setup
and press
Enter
(remote OSD) or
F11
, select the row
Net-
work
and press
Enter
(local OSD).
3. Select the entry
Ping host
and press
Enter
.
4. Use the
Host
entry to enter the IP address or the host name and press
Enter
.
5. The test results are displayed in the following table:
6. Press
Esc
to leave the menu.
Transmitted:
number of transmitted data packets
Received:
number of received data packets
Lost:
number of lost data packets
Min. RTT:
minimum round-trip-time
Avg. RTT:
average round-trip-time
Max. RTT:
maximum round-trip-time
NOTE:
A message informs the user if the host name cannot be resolved into an
IP address.
Summary of Contents for DP1.2-Vision-IP-Fiber
