Status displays
G&D DP1.2-Splitter-2 ·
4
English
Status displays
The LEDs on the device’s back panel highlight the operating status of the device.
The blinking modes have the following meaning:
LED
Status
Meaning
Video In
Lights yellow
The input signal has been detected at the video input.
Flashes yellow
The connection to the graphics card has been detected.
Off
No connection to graphics card.
Video Out 1
Lights yellow
A monitor has been detected at video output 1.
Off
No monitor has been detected at video output 1.
Video Out 2
Lights yellow
A monitor has been detected at video output 2.
Off
No monitor has been detected at video output 2.
Status
Lights green
The controller is ready for operation.
Lights red
Reset of controller.
0
1
5
3
7
2
4
6
8
9
Power In
Service
Video In
Video Out 1
Video Out 2
Status
