G&D Audio-Transceiver-CAT, Installation And Operations

Page: 27 / 44

Introduction
Audio-Transceiver-CAT · 3
English
Introduction
By using two signal extenders of the
Audio-Transceiver-CAT
series, you can transmit
audio signals between a computer and a remote console via a category 5e (or better)
twisted pair cable connection.
Audio signals are transmitted in both directions between the connected extenders.
A rotary switch lets you amplify the analogue audio signal coming in at the interface
Line In/Micro In
(see page 7).
Package contents
 1 × Signal extender Audio-Transceiver-CAT
 1 × Portable power pack
 1 × Power cable
 1 × Audio cable ( Audio-M/M-2-ferrite )
 1 × RCA audio cable ( Audio-SPDIF-COAX-M/M-2 )

1 × Service cable (
USB-Service-2
)

1 × »Safety instructions« flyer

1 × Manual
IMPORTANT: Transmitting audio signals requires
two
signal extenders. The package
contents given below refer to one device.
NOTE: The variant
Audio-Transceiver-CAT-ANALOG
does
not
provide any
digital audio
interfaces. Therefore the package contents do not include any RCA audio cables.