GS65011-EVBEZ
EZDrive
TM
Open Loop Boost Evaluation Board
User’s Guide
_____________________________________________________________________________________________________________________
GSWPT-EVBEZ Rev190621
© 2019 GaN Systems Inc.
www.gansystems.com 3
Please refer to the Evaluation Board/Kit Important Notice on page 15
Introduction
The GS65011-EVBEZ Evaluation Board (EVB) is an open loop Boost converter and was
designed to help customers evaluate GaN Systems’ EZDrive
TM
solution with a GaN
Systems’ E-HEMT.
The EZDrive
TM
circuit is a low-cost, easy way to implement a GaN driving circuit using a
standard MOSFET controller with integrated driver. The EZDrive
TM
circuit provides
design control for the optimization of efficiency and EMI. It is adaptable to any power
level, any frequency, and any LLC and PFC controller.
The board is populated with GaN Systems’ GS-065-011-1-L, a 5×6 mm PDFN package
Enhancement-Mode High Electron Mobility Transistor (E-HEMT).
Evaluation Board Contents and Requirements
Kit Contents
The GS65011-EVBEZ includes the following hardware.
Table 1
•
GS65011-EVBEZ Evaluation Kit Contents
Quantity
Description
1
GS65011-EVBEZ
GaN E-HEMT evaluation board assembly
Hardware Requirements
In order to evaluate the performance of the evaluation board, the following equipment is required:
•
High speed digital oscilloscope
•
DC load (power resistor or electrical load)
•
High voltage DC power supply
•
Low voltage DC power supply
•
DC test leads