6
DI 150
Placement
The DI 150 will get hot during use. It is important that it has free space all around the ampli
fi
er, espe-
cially the sides and the top.
Connecting to the mains
Your DI 150 has been especially made for the country to which it has been shipped. Any attempt to
change the voltage or other types of modi
fi
cations should be considered unsafe and may cause dam-
age to both the ampli
fi
er and any connected equipment. Warranty is annulled by any form of modi
fi
-
cation performed by any person not authorised by GamuT.
Connect the DI 150 to the mains supply with the supplied IEC mains cable.
For further improvements to the level of sound quality, various types of mains cable type may be
tested. Like the importance of any other cable in the system, the quality and re
fi
nement of the
mains cable has in
fl
uence on the total balance of the sound. Please feel free to experiment with the
various brands available in your country. Please note that GamuT cannot accept responsibility for
damage incurred due to improper usage, connection, or manufacture of other cables than the
enclosed.
The mains switch is located underneath the ampli
fi
er’s front right corner.
Before switching on the
ampli
fi
er, make sure that volume is reduced to or near zero. After switching on the ampli
fi
er, you will
hear two small clicks from inside the ampli
fi
er and possibly also one from each speaker.
Connecting to other equipment
The GamuT DI 150 features six signal level inputs and three available outputs;
Inputs
Four unbalanced inputs:
CD
•
Tuner
•
Tape
•
HTH (bypass option)
•
Two Balanced inputs:
Bal 1
•
Bal 2
•
Please note that all connectors of the DI 150 are gold plated. This is done to ensure long lasting and
stable connections. Only use cable and connectors either gold or silver plated.
