Gammapiu GAMMA+ RAINBOW KORNER XL, User Manual

Page: 9 / 104

9
Press the [B] key for about 1 second.
Select the desired temperature by pressing
[B]
. The LED
[C]
corresponding to the
selected temperature starts blinking.
When the iron has reached the selected temperature the LED
[C]
becomes steady.
Proceed with using it according to the type of hair. Refer to the
"Styling tips"
to
style your hair.
The elements reach high temperatures in a few seconds. Do not
touch the heating elements and do not bring the appliance too
close to your face, ears, neck and skin. RISK OF BURNS.
SWITCH-OFF
Press and hold button
[B]
for about 3 seconds.
Do not pull the cord or the appliance to disconnect the power cord
[D]
from the
mains socket.
Put the appliance in a safe place and wait as long as necessary for it to cool completely.
Take care not to wind the power cord around the appliance when storing it.
Standby mode
For greater safety, the appliance will automatically switch-off after 60 minutes of
inactivity, while remaining connected to the mains.
HAIRSTYLING TIPS
This professional appliance becomes very hot. We recommend that
utmost attention be paid to the condition of the hair that is to be
treated, especially in the case of bleached and deconstructed hair.
We recommend a maximum of 3 seconds of application and to
always test a hidden lock in advance.
• Wash your hair as usual, dry and brush it to untangle any knots.
• After drying, do not use hairspray, mousse or gel.
• Switch on the appliance and select the most suitable operating temperature for
your type of hair (see Switching on and use).
• Take a lock of hair and place it between the heating elements, starting from the
closest point to the scalp or the desired point.
• To obtain a wavy effect, rotate the appliance by 180 or 360 degrees, twisting the
hair around the appliance, and slide it down the lock of hair to the ends. To obtain
a straight effect, close the tip of the appliance with your fingers to grip the hair
and slide it down the lock of hair to the ends.
• Start styling from the nape of the neck and then move on to the sides and lastly
to the front.
• Continue until the hairstyle is complete.
Steam may be produced while straightening; this is normal due to the excess
moisture in the hair which evaporates.
• Switch the appliance off after each use.
MAINTENANCE
In case of malfunction or damage to the appliance or a part of it,
the appliance must be analysed by the manufacturer or the relevant
technical assistance or in any case by a person with similar skills in
order to prevent any risk. The user must not disassemble the device
him/herself.
After each use
clean the appliance.
GENERAL CLEANING
• Always disconnect the power cord from the mains socket and make sure the
straightener is completely cool before cleaning.
•
Avoid all risk of electric shock by not cleaning the appliance with water and
do not immerse it in water.
•
Do not use abrasive solutions or concentrated detergents.
• Clean the exterior with a soft cloth or slightly damp cloth.
• Clean the heating plates with a slightly damp cloth and a mild detergent.
• After use, make sure that all parts are completely dry.