Gamma Semi, User Manual

Page: 17 / 126

17
EN
The systolic
pressure Value or
diastolic Pressure
value too high
1.The cuff was held
lower than your heart
Keep correct position
and measure again
2.The cuff was not
attached properly
3.You moved your
body or spoke during
measurement
The systolic
pressure value or
diastolic pressure
value too low
1.The cuff was held
higher than your heart
2.You moved your
body or spoke during
measurement
CARE AND MAINTENANCE
To avoid the monitor attracting dirt, dust or other contaminants, wash and
dry your hands thoroughly before use.
Cleaning
• To clean the monitor exterior, wipe it with a cloth moistened with tap
water or a mild cleaning agent, then dry the device with a soft dry cloth.
Do NOT flush with water.
• Do NOT use organic solvents to clean the monitor.
• Do NOT wash the pressure cuff.
• Do NOT iron the pressure cuff.
Monitor Storage
• Storage condition: -20°C to 55°C (-4°F to 131 °F), below 95% relative
humidity.
• Always store or transport the monitor in its original storage case.
• Avoid dropping or heavy impact.
• Avoid direct sunlight and high humidity.