Gamma PRO 100, Owner'S Manual

Page: 7 / 11

6
STRINGING THE FRAME
Starting the Main Strings
To begin stringing the main strings, count
the number of holes at the throat of the
frame, which will determine the starting point.
For racquets with 4 or 8 holes at the throat,
the main strings will begin at the head. For
racquets with 2 or 6 holes at the throat, the
main strings will begin at the throat.
Thread the two ends of the string through the
two center grommet holes at the head or
throat as determined in the previous step.
Route the strings through the opposite center
holes.
Clamping the First Main String
Thread one end of the string through the
adjacent grommet hole and pull excess by
hand. Clamp both the center and the adja-
cent string to each other on the inside of the
frame.
Pulling Tension
While holding the tension bar slightly above
horizontal, wrap the free string clockwise
around the gripper drum once and position
between the gripper jaw.
Gently turn the gripper clockwise while
squeezing the jaws together until all slack in
the string is removed.
Note: For proper operation, the string gripper
jaw must be in the position shown. The
tension in the string provides the clamping
force to the jaws.