CADIAX compact
74
8
Specifications
8.1
Technical data
ADC resolution:
14 bit (CADIAX compact 2, model A)
16 bit (CADIAX compact 2, model B)
16 bit (CADIAX 4, model A)
Measurement data display:
0.01 mm
Distance accuracy:
± 5 %
Angle accuracy:
± 1.5 °
Supply voltage:
5 V DC (in compliance with USB specifications)
Current input:
max. 0.5 A (in compliance with USB specifications)
Protection class:
B
8.2
Cleaning
8.2.1
CADIAX device
Make sure that the CADIAX device is disconnected from the computer. Also disconnect the sensors
and the foot switch from the device. Remove dust and dirt with a soft cloth.
Do not use liquid, and make sure that no liquid gets inside the device during cleaning. The
device must never be cleaned under running water or any other liquid. Do not use stiff brushes or
steel wool.
Never clean the device with alcohol, organic solvents, or disinfectants, as these may cause
damage to the components and the housing.
8.2.2
Measuring flags
The flag surface must not be damaged (e.g., scratched) or soiled (oil, dust, fingerprints, etc.). Check the
condition of the flag surface before every application.
If necessary, the flag surface has to be cleaned. To do so, wipe the measuring area with rubbing alcohol
and dapple it dry with a soft, lint-free cloth. Leave it in the open afterwards for it to dry completely. Make
sure not to damage the sensitive surface during cleaning.
Never treat or clean the flags with stiff brushes or other abrasive materials.
Summary of Contents for CADIAX 4 A
