Gamma CADIAX 4 A, Operating Instructions Manual

Page: 21 / 80

Introduction
21
·
The Tool Bar that is located below the menu bar
provides icons to quickly access commonly used
functionalities. The availability of these icons can de-
pend on the actual state and working context of the
application.
·
The Status Bar at the lower border of the window dis-
plays contextual information regarding the actual state
of the application as well as progress information in
the case of long-running tasks.
1.7 Scope of delivery
The accompanying packing list describes the exact scope of delivery. After taking delivery of
your CADIAX system, please make sure to immediately check the package contents for com-
pleteness and faultless condition.
The CADIAX system does not include the material for fixing the occlusal-tray clutch on the lower jaw
teeth of the patient. You will need suitable bite registration material (e.g. Exabite II by GC) and the ap-
propriate dispenser.
For fixing the para-occlusal clutch, you will need a composite for temporary restorations (e.g. Protemp II
by 3M) and a temporary cement such as a zinc-oxide cement (e.g. TempBond by Kerr) or a carboxylate
cement (e.g. Durelon by 3M).
Furthermore, a face-bow system is required for mounting the CADIAX measuring sensors, such as Con-
dylograph or Condylograph comfort by GAMMA. Such is not included in the regular scope of delivery of
the CADIAX system.
Please contact your local distributor for further information.