Gamko GB Series, User Manual, Page: 79 / 88

78 79
User Manual
74
Fitting storage racks
1. Place pin (a) in the opening (b)
of rails.
2. Tilt the shelf support.
3. Push both sides of the shelf
support towards each other
and push the shelf support in
place.
4. Place the shelf with the
openings at the back of the
cabinet onto the pins of the
shelf support.
5. Lower the shelf onto/between
the shelf support at the front
of the cabinet.
User Manual
75
Power supply
• If this device cable is damaged it must be replaced with an original
cable supplied by the producer.
• In case of emergency: remove the plug lead from the socket.
• The socket should be within easy reach of the cabinet.
• Check for the correct power supply, referred to the information on
the type plate.
• Ensure that the plug lead cannot be trapped or snagged.
• If necessary the plug lead can be extended by a qualified electrician.
• We do not recommend the use of an extension lead.
Fluctuations in the power supply can cause damage, which
causes the cabinet to switch off. Gamko cannot be held
responsible for any consequential damage.