13
4.
Check to be sure in your sim setting that FFB effects are switched on.
5.
Go flight.
Note 1: there are at least two different versions of FFB implementations. Ga-
metrix ForceFeedback driver supports only one of them.
Note 2: you can use
to check if your vibe cushion works as FFB de-
vice.
trick #2
This trick is for SimShaker Sound Module users only. If you'd like to mix at your
transducer(s) SimShaker played low frequency sound samples and DCS World
gameplay generated sounds in order to get even more rich experience, you can
try
. Thanks Olaf (f4l0) for sharing that.
tip #1
If your Gametrix JetSeat (or Air) device suddenly looks dead, you should try to
reload its firmware by yourselves, following this simple procedure. It takes
about 5 minutes or less.
1.
from Gametrix web-site, unzip it somewhere;
2.
from Gametrix web-site, unrar it to the same
folder;
3.
unplug the device USB;
4.
switch off the device power;
5.
plug in the device USB;
6.
press and hold buttons MODE and MOTORS;
7.
switch on the device power (at the very first time Windows discovers a
new device);
8.
release buttons;
9.
wait until drivers for new device installed;
10.
start FirmwareLoader.exe;
11.
load firmware into device by pressing the button with a red arrow "Об-
новить";
12.
unplug the device USB;
13.
switch off the device power;
14.
plug in the device USB;
15.
switch on power and check if the device works.
for teaching me the procedure.
tip #2
During OnceClick application installation or update process antiviral software
(Symantec Endpoint Protection, Dr.Web, etc.) may block files download. They
