A
CONTENTS
1 x Trap Light
IMPORTANT
Read these instructions carefully before use.
Take care when fitting the Trap Light.
INSTRUCTIONS FOR USE
1. Remove the cover of the battery compart-
ment by loosening the crosshead screw.
2. Insert 2 x AA batteries (we recommend
alkaline) taking care to match the polarity
correctly, as indicated within the battery
compartment.
3. Replace the cover and tighten the screw.
Do not over-tighten.
4. Turn the unit on by sliding the power switch.
If the lights do not come on check that the
batteries have been inserted correctly.
ADULT SUPERVISION IS RECOMMENDED
WHEN CHANGING BATTERIES.
Fitting the Trap Light to your Game Boy Advance console
• To fit the Trap Light to the Game Boy Advance, follow the diagrams below: fig.(A,B,C)
• To remove the Trap Light, reverse steps 1 – 3 in the previous section. fig.(A,B,C)
• To open the Trap Light follow the diagrams below: fig.(1)
• To close the Trap Light, reverse the steps in the previous section. fig.(1)
‘CLICK’
C
‘CLICK’
‘CLICK’
1
B
Summary of Contents for trapLight RC71082
Page 2: ...P N 82362400 Rev A E ...
