9
Support Text 501-746-0711
SETTING CAMERA UP ON TRAP
Refer to
page
3
for Camera Images
1. Secure Directional Antenna to top of camera pole, attach the five-foot cable to the antenna.
(When mounting the directional antenna make sure the small hole is facing toward the ground.)
2. Using the clamp
(4)
on the Vision Cam, attach it to the pole. Attach the five-foot cable from the
antenna to the 4G connector
(1)
on the camera.
3. Depending on the electronic package:
• Traps with a
3 Prong Yellow Cord
attach it to
3 Prong Power
on the camera
(6)
. You will not
use the other power and gate port
(5, 2)
.
• Traps with the
Two Prong Power
, connect wire to the
Two Prong Power
on the camera
(5)
,
then connect the
Two Prong Gate
to the gate latch
(2)
.
Now wait around 5-10 minutes for the camera to power up.
(Refer to
page 3
for power light status.)
4. View the camera from the app and adjust camera mount to get full view of the trap. In low signal
areas refer to
page 8
for wi-fi option. Use the lens cleaner to clean any dust off the lens.
5. Always test the latch before you set the gates.
• On the trap click the latch closed, then go to the app and hit
Alarm Out
, next
Alarm Out 1
.
You should hear and see the latch open. Make sure you toggle alarm out 1 to off before exiting
the app. (
Refer to
page 6
)
YOU ARE NOW READY TO SET YOUR GATES.
Charge Controller Configuration
Things to be aware of and check on the Charge controller located in the battery box.
• If the charge controller is showing
10.7 V Load
or lower it will
NOT supply power to the cam-
era.
• Once the solar panel charges the battery and the charge controller gets back to
12 V Load
it
will turn the camera back on.
Solar Indicator:
Green Constant On:
Bulk Equalization Charge
Green Slow Flash:
Float Charge
Green Off:
Not Charging
Battery Indicator:
Green Flash:
Battery too High
Green On:
Battery Normal
Yellow On:
Battery Medium
Red On:
Battery Low
Red Flash:
Battery Very Low
Load Indicator:
Red On:
Load Output Normal
Red Off:
Load Not Working
Normally a fully charged 30 ah battery will last
4 days with no solar input.
