Instruction Manual : 6’ X 6’ HYBRID BLIND
20
FIGURE 10
STEP 10
10. Attach the assembled roof to the rest of the blind
frame using eight 1/4-20 X 1-1/2 IN bolts (49) and
1/4-20 nuts (56). SEE FIGURE 10. Pay attention to
the orientation of the roof! The roof attaches on the
inside of the roof hub (3, 35, 36) tabs. SEE DETAIL B.
Securely tighten all loose hardware at this time.
DETAIL B
49
56
STEP 11
FIGURE 11
11. It is now time to begin the attachment of the sewn
panels to the frame. Lay out all sewn panels and
familiarize yourself with them. Pay special attention
to the back wall panel and the two side wall panels
as they look similar at first glance but are different.
You can identify the panels by sewn tags on the
inside near the window.
While paying attention to the orientation, SEE
DETAIL C, slide the four (28) window poles into the
sewn sleeves on the two side wall panels (42) as
shown, two poles per panel. SEE FIGURE 11.
28
42
DETAIL C
35
3
36
