background image

Warranty Information

1.

Manufacturer warrants this product to be free from defects in workmanship and 
materials for a period of 90 days from the date of purchase, PROVIDED claims are 
submitted, in writing, with proof of purchase.  

2.

If any part of this item fails because of a manufacturing defect within the Limited 
Warranty Period, manufacturer offers to replace such part(s) provided that such 
parts have not been improperly repaired, altered, or tampered with or subject to 
misuse, abuse, or exposed to corrosive conditions. This Limited Warranty is, 
however, subject to certain limitations, exclusions, time limits, and exceptions 
(hereinafter “conditions”) as listed below.  Read these conditions carefully.

3.

This Limited Warranty shall be limited to the replacement or repair of any part(s) 
which manufacturer determines, after reasonable examination, to have been 
defective at the time of manufacturing and manufacturer’s obligation(s) shall be 
limited to replacement, if any, of defective part(s) which shall be shipped at original 
purchaser’s expense to original purchaser’s designated shipping address.

4.

This Limited Warranty is given to and covers the 

ORIGINAL PURCHASER ONLY

and such coverage terminates 90 days from the date of purchase.

5.

DAMAGE LIMITATION WARNING:

IN NO EVENT SHALL MANUFACTURER BE 

LIABLE FOR ANY INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING 
(BUT NOT LIMITED TO) LOSS OF USE OF THE PRODUCT, LOSS OF TIME, 
INCONVENIENCE, EXPENSES FOR TRAVEL, TRANSPORTATION, LODGING 
EXPENSES, LOSS OF FOOD, LOSS BY DAMAGE TO PERSONAL PROPERTY 
OR LOSS OF INCOME, PROFITS OR REVENUE.

6.

MANUFACTURER’S OBLIGATION:

Manufacturer’s liability shall be limited to the 

delivery of a good, merchantable product, and, if necessary, the repair or 
replacement, at manufacturer’s option, of any defective part or unit.

7.

TRANSFER LIMITATIONS:

This Limited Warranty is not assignable or 

transferable.  It covers only the original purchaser.

8.

RESERVED RIGHT TO CHANGE:

Manufacturer reserves the right to make 

changes or improvements to products it produces in the future without imposing on 
itself any obligations to install the same improvements in the products it has 
previously manufactured.

9.

This Limited Warranty gives the original purchaser specific legal rights, but there 
may be other rights which vary by jurisdiction.

10. This warranty does not cover the following items:

- Chips or scratches on porcelain or painted surfaces
- Rust or corrosion is not deemed a manufacturing or materials defect
- Discoloration or loss of paint due to handling during assembly, heat, or

cleaning products. Paint may require touch up.

- Stainless steel discoloration or corrosion
- Consumables such as batteries
- Damages caused by wild game 

Pg.18

HU2339801-GW

20210304-V1.0

Summary of Contents for 165840




















Reviews: