Instruction Manual : 15’ LADDER STAND
12
STEP 3
10
24
12
23
23
3. Assemble the seat rail/seat assembly and seat
spreader bar (12) to the seat side rails (10) using
four 1/4-20 X 2-1/2 IN bolts (23) and four 1/4-20
nuts (24). SEE FIGURE 3.
NOTE: Be sure the parts and hardware
orientation is correct. The seat spreader bar (12)
goes on the outside of the seat side rails (10). SEE
FIGURE 3.
FIGURE 3
STEP 4
4. Locate both flared platform rails (3) and insert into
the bottom ends of the seat side rails (10), aligning
holes in both parts while also aligning the hole in
the end of each support bar (8). Secure each side
with two of the following: 1/4 -20 X 1-1/2 IN bolts
(20), washers (22) and 1/4-20 nuts (24). SEE FIGURE
4.
10
3
8
20
22
24
FIGURE 4