Game Composites GB1 GameBird, Maintenance Manual

Page: 17 / 269

Maintenance Manual GB1 GameBird
Page date: April 24, 2020
5-4
Access
For inspection, the following panels may be removed or opened as appropriate. Items that have their own
chapter in this Manual (for example cowling) are not listed here. The inspection checklists assume that this has
been done and does not repeat the instruction to remove and reinstall these panels.
No. Panel Mounting Hardware provides access to:
1
Firewall Belly Panel, fwd
bottom fuselage
8 x AN525-832R9
Fuel selector valve, pump Acrotank parts (flop
tube & strainer)
2
Foot rest panels (right and
left)
1 x AN525-832R9
Battery & regulator (left) Smoke pump (right)
Engine mount, lower attachment points
NOTE: Panels will only fit if main bolt handles
are in correct position, located in recess.
3
Side panels (right and left,
front and back seat)
3 x AN525-832R9 each
Engine controls (left, front & rear), Electrical
parts (rear, left & right)
Wing main pins (front, left & right)
4 Baggage bay floor panel 4 x AN525-832R9
Aft fuselage inside, Static Port connections,
Magnetometer
5 Under-wing panels (LH & RH) 3 x AN525-832R9 each Aileron bellcranks
6
Front seat (and seat
cushion), front cockpit
4 x AN525-832R9
Rudder & elevator control systems, Inside rear
center console (fuel selector, VHF and XPDR),
Electrical power distribution blocks & ground
bus, pitot-static system
7
Rear seat (and seat cushion),
rear cockpit
4 x AN525-832R9 Rudder & elevator control systems
Philips 2 screwdriver is required.
Vulcan Fiber washers under heads of AN525 screws, to be replaced on condition:
Part Number
10038970
Manufacturer: Menzel & Seyfried GmbH
Olchinger Strasse 60
82194 Groebenzell, Germany
www.gummi-menzel.de