Gambro Cobe Spectra, Essentials Manual

Page: 76 / 245

Software Options and Configuration
5-2 COBE
®
Spectra™ Apheresis System • Essentials Guide
Menu/Software Navigation Basics
To display the next screen in a series you may enter a numerical value,
make a selection, or press
ENTER . To review previous screens, press
CLEAR . When reviewing screens, the values you previously selected or
entered appear. If necessary, you may change the values. To display the
next screen that requires a response, press
ENTER .
Fields that require an entry appear in brackets: “{ }.” Press ENTER to
move the brackets to the next field.
Spectra System Configuration
The following parameters have default settings, but can be configured
for some or all of the Spectra system procedures. These parameters
operate independently, although they may affect each other. Changes
made in configuration affect every procedure.
Access the configuration selection screens as follows:
1
Press MENU ON/OFF .
2
The menu appears:
Press 6.
3
The first configuration selection screen appears:
Press ENTER
4
The second configuration selection screen appears. This screen
varies among the different Spectra system versions:
Spectra system version 4.7, 5.1, and 7.0 screen:
Spectra system version 6.1 screen:
Press ENTER .
5
The third configuration selection screen appears. This screen varies
among the different Spectra system versions:
Spectra system version 4.7 and 6.1 screen:
Spectra system version 5.1 screen:
Spectra system version 7.0 screen:
1=Data Entry, 2=Pressure Display, 3=CCM,
4=Air Remove, 5=Strobe, 6=Configuration.
Configuration: 1=Height/weight units,
2=Decimal point, 3=AC rate, ENTER=more.
Configuration: 1=plasma collect,
2=endpoints, 3=ratio, ENTER=more.
Configuration: 1=plasma collect, 2=end
points, 3=ratio, 4=AutoPBSC, ENTER=more
Configuration: 1=high flow, 2=step down
3=Single Needle, 4=yield cal.
Configuration: 1=high flow, 2=step down
3=Single Needle, 4=LRS, 5=yield cal.
Configuration: 1=high flow, 2=step down
3=Single Needle, 4=LRST, 5=Yield Scaling