Gambro COBE 2991, Essentials Manual

Page: 264 / 273

8-6 COBE 2991 Cell Processor • Essentials Guide
General Maintenance
Before using the COBE 2991 in its new location, do the following:
• Lock the casters.
• Plug in the AC power cord.
• Turn the power on and verify the READY light illuminates.
• Prime the COBE 2991. See “Priming” on page 6-36.
Operator Maintenance of the COBE 2991
The COBE 2991 requires no operator maintenance other than the following:
• Routine cleaning.
• Disinfecting as needed.
• Priming the hydraulic system as needed.
Preventive Maintenance
To prolong equipment life and to provide maximum performance of the COBE
2991, a qualified service representative must perform preventative maintenance
(PM) procedures on the COBE 2991 at 1-year intervals. Gambro BCT
recommends a PM performance compliance window of ±30 days from the PM
anniversary.
Spare Parts
Spare parts for the COBE 2991 are available through your local Gambro BCT
representative or qualified service representative.
Returning Used Product
To return the COBE 2991 or any consumables, please contact your local Gambro
BCT representative.
Disposing of the COBE 2991
Follow your local regulations for disposing of equipment or material that may be
contaminated with biohazardous products.
Caution:
The
health care
institution is
responsible for adequately
preparing and indentifying
product for return
shipment. Local regulations
may restrict or prevent
shipment of products
contaminated with
biohazardous material.