Gambro COBE 2991, Essentials Manual

Page: 203 / 273

Installing the Cell Processing Set
COBE 2991 Cell Processor • Essentials Guide 6-5
P
rocessing
and C
o
mmon
Operations
6
17
Lift the seal weight slightly so that the seal weight latch arms clear the sliding
covers’ plastic blocks (Figure 6-4), and open the sliding covers.
When the sliding covers are open, Gambro BCT suggests that you leave the
seal weight in place on the guide posts to prevent it from being inadvertently
dropped and damaged.
Figure 6-4: Lifting the seal weight
Caution:
The
seal weight
should move
freely on the guide posts.
The contacting surfaces
should be clean and free of
debris and nicks, but not
lubricated in any way. Each
seal weight is matched to a
particular COBE 2991; seal
weights are not
interchangeable.
Seal weight latch arms