assembly
screen blanking
mounting screws
accelerometer
USB plug
The dock (with the screen blanking assembly attached) can now be mounted
using the mounting hardware typically supplied with the docking station.
3. Attach the accelerometer USB plug and any other peripheral cables to the
docking station and cable tie in place. The USB and ethernet cables will need to
cable tied in a secondary location (ie. the serial port or HDMI location) since they
need to be bent and routed over to come out the opening on the bottom side.
4. Attach the screen blanking assembly to the new cable restraint bracket with
the (2) #6-32 x 3/8" long mounting screws that were removed in step 1.
