CABLE RESTRAINT INFORMATION
Retain the USB and Ethernet cables at the
Restraint Bracket using the supplied cable ties.
If desired additional cables can be routed and
attached to Restraint Bracket with cable ties.
USB/Ethernet
Restraint Bracket
POWER SUPPLY INFORMATION
(NON INTERNAL POWER SUPPLY MODELS)
Panasonic recommends using a Lind Auto Adapter (Lind part No. PA1580-2961) to power the
docking station. It can be ordered from Gamber Johnson (part No. 14103) or directly from Lind
Electronics, Minneapolis, Minnesota (952-927-6303).
Installation of the Power Jack:
With cable of Power Jack oriented perpendicular to the bottom of the dock insert Power Jack into
socket labeled
DC IN 15.6V.
After Power Jack is inserted into socket rotate Power Jack towards
LAN/WAN labels to lock Power Jack into socket. Insert cable between snap finger and frame and
secure with cable clamp and screw. See image below for correct position of cable to maximize
space around RF connector, if dock is so equipped.
Pg 5
Cable Clamp
Power Jack
Pull Cable tightly against inside wall
of housing, making radius as small
as possible. Tighten Cable Clamp Screw.
LAN/WAN Labels
Snap Finger