Assembly Instructions
A. Bulb Assembly
1. Remove the lens by turning
it counterclockwise
(Fig. 1)
2. Make sure the Low/OFF/
High switch is in the OFF (O)
position.
(Fig. 2)
B. Solar Light Fixture
Assembly
1. Slide the decorative cap
over threaded shaft
(Fig. 5)
2. Install the wall bracket
to the threaded shaft by
turning it clockwise
(Fig. 6)
.
3. Your item will be fully
assembled as shown.
(Fig. 7)
1. Remove the lens by turning it
counterclockwise
(Fig. 1)
2. Turn the operation switch
(Fig. 8)
to the ON position at the desired
settings.
a. (I) For softer light and longer duration.
b. (II) For brighter light output.
The Solar Lamp will automatically operate
from dusk to dawn.
3. Reattach the lens by turning it
clockwise
(Fig. 4)
.
page 3
5. Reassemble the unit
by reversing the above
procedure
(Fig. 4)
Operation Instructions
Refer to the “solar light location”
paragraph before choosing the
installation location.
Using the wall mount as a
template, drill two holes in the
wall, and place provided anchors
into the holes. Place the wall
bracket in line with the holes
and secure the light fixture
with the provided screws.
Installation Instructions
3. Remove (if needed) the
existing bulb by turning it
counterclockwise
(Fig. 3)
4. Install the new GS Solar LED
Bulb by turning into the
bulb socket clockwise
(Fig. 3)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
