GS-97FW
NOTE: locate your solar lamp facing the south for best results.
Use electric drill to make two holes in the wall, place provided screw anchors
into the holes, place the wall bracket (N) in line with the holes and screw on
with the provided screws.
Place Lamp (A) onto bracket and secure with the 3 screws provided.
Replacing the Batteries
(After several years of use, the batteries may need replacing).
1.
Detach the upper part of the lamp as shown in Fig. 1 by turning it
counterclockwise.
2.
Make sure the operation switch is in the OFF position.
3.
Release the battery compartment’s screw located on the silver reflector
and remove the old battery pack as shown in Fig. 4. Make sure the new
batteries are high quality – 2 x Li-Ion Battery Pack (3.2 Volt / 3000
Ma).
4.
Install the new batteries into the battery compartment.
5.
Reassemble the unit by reversing the above procedure.
N
Fig. 4
