Surface Mount:
Note: There are specific types of
screws for different surfaces. If
you’re unsure of the appropriate
type of screw to use on your
desired surface, please consult a
professional.
page 3
Advice: Ideal Pole Height: 8 – 15 feet; Ideal Pole Diameter: 2-3 inches (Fig. 1). If multiple
lights are purchased (Fig.2) install between 30-50 feet apart for optimal light spread.
8 – 15 f
eet
30 – 50 feet
30 – 50 feet
30 – 50 feet
Assemble hardware to fixture housing;
slide fixture over light post and make
sure the curved side of the mount hugs
the light pole; adjust to desired height
and position, then tighter the four bolts.
CAUTION: DO NOT OVERTIGHTEN SCREWS
Post Mount:
Possible places to install the GS-201:
• Outside Garage • House Entryway • Patios • Garden • Driveway
• Camping Site • Rural Street • Farm • Green Belts • Square
Fig. 1
Fig. 2
Diameter
2-3 inc
Post
Make sure the alignment of your mounting
location is level and even for your solar light
installation. Drill four holes into your desired
installation surface and place anchors in to
the holes. Position the four provided screws
through the holes of the lamp and into the
anchors. Tighten the screws to secure the lamp
to the surface.
*Pole not included
