Gama Sonic GS-121, Instruction Manual

Page: 3 / 4

3
Assembly Instructions
Ground Mounting
1. Assemble the 2 mounting poles (B) into the body unit
(A) using the 2 screws provided (as shown in figure 1).
2. Carefully insert the unit into the ground where desired.
NOTE: If the ground is hard and packed, moisten the
ground with water before inserting the stake (to avoid
breakage). Use a rubber mallet (not included), if
necessary, to gently tap stake into ground.
Figure 1
Warning: Make sure that the product does not protrude above the surface.
Wall mounting
Figure 2-1
1. Assemble the 2 wall brackets (C) into the body unit (A)
using the screws provided (as shown in figure 2-1).
2. Install the wall brackets to the wall using the screws
and nags provided (as shown in figure 2-2).
Figure 2-2
Operation
1. Slide out the inner part.
2. Remove the tag located on top of the
battery compartment (as shown in
figure 3).
3. Return the inner part.
NOTE: The solar light must be
charged for two sunny days for best
results.
Figure 3