3
Pier Mount:
Note:
There are specific types of screws for specific surfaces. If
you’re
unsure of the appropriate type of
screw to use on your desired surface, please consult a professional.
1. Attach the fixture
(A)
to the pier mount
(C)
with the screw
(Fig.2)
.
2. Use a drill to make two holes in the desired surface. (use the
pier mount as a template for drilling locations)
3. Place the anchors into the holes and place the lamp in line with
the holes.
4. Secure it with the provided screws.
Wall Mount:
Note:
Installing the light on a wall may limit the solar panel for sun exposure.
Make sure the lamp
is mounted so direct sun exposure is available.
1. Attach the fixture
(A)
to the
wall bracket
(D)
with the
screw
(Fig.3)
.
NOTE:
The wall mount has two different size holes on the arm,
make sure the fixture is attached to the side with the smaller hole.
The screw will go through the larger hole on the bottom, so it
will be hidden after installation.
2. Use a drill to make two holes in the wall where the lamp will be
mounted. (use the wall mount as a template for drilling locations)
3. Place the anchors into the holes and place the lamp in line with the
holes.
4. Secure using the provided screws.
Operation Instructions
Turn the switch on the lamp head to HIGH or LOW position.
LOW lasts longer using dimmer light, HIGH mode provides brighter light output.
NOTE
: The performance of the solar lamp will vary with the time of year. It will deliver longer
duration when it has had a full day in the sun rather than a day in overcast weather.
Fig.2
Fig.3
