4
Operation Instructions
Installation Instructions
GS-124P (Fig. 3)
Note:
There are specific types of screws for specific surfaces. If
unsure of the appropriate type of screw to use on your desired
surface please consult a professional.
Remove part (A) from part (B) by removing the 2 screws as
shown in Fig. 1. Turn the operation switch (Fig. 2) to the ON
position, and the solar lamp will automatically operate from
dusk to dawn.
Reattach part (A) to part (B) and secure with the 2 screws.
1.
2.
Screw the fixture (B) into the flat base (P).
Use a drill to make two holes in the desired surface.
Use the appropriate mounting hardware to secure your lamp
to the desired surface.
1.
2.
3.
FIG. 2
FIG. 1
FIG. 3
ON
OFF
Summary of Contents for AURORA GS-124F
Page 8: ...7...
