1. Remove the top (A) from the
fixture (B) by removing the two
phillips head screws.
2. Install the GS Solar LED Bulb into
the top.
3. Move the operation switch to
your desired setting.
4. Attach the top (A) back to the
fixture (B) and secure using
the two phillips head screws
removed earlier.
5. Place the wall bracket (C) in the
desired mounting location.
NOTE:
Make sure the long arm of the
bracket is on top
6. Using the bracket (C) as a
template, mark where the two
holes will need to be.
7. Using an electric drill, make two
holes no larger than the size of
the included anchors.
8. Place the anchors in the holes
drilled.
9. Align the wall bracket (C) with
the holes and secure it using
the provided screws.
10. Attach the top (A) to the wall
bracket (C) by screwing it in
clockwise.
1.
Insert the GS Solar LED Bulb into the top (A) by twisting clockwise.
2. Move the operation switch to the Low or High position according to
your preferences:
Low = Softer light and longer duration
High = Brighter light output
3. The solar Lamp will automatically operate at dusk
Assembly Instructions
Operation Instructions
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via our Toll Free number: +1-800-835-4113
Your Lamp can use the following bulbs:
C37WW10W – included bulb with Warm White LEDs (2700K)
C37BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – Flame bulb with simulated flame LEDs
T45WW10W – Edison LED Bulb with Warm White
LEDs (2700k)
Your lamp uses two of the following battery:
GS32V30
Replacement Parts
page 3
