Assembly Instructions
Operation Instructions
page 3
• Separate the wall bracket (B) from the
fixture (A) by removing the two screws on
the side of the lamp.
• Using the bracket (B) as a template, mark
where the two holes will need to be made.
• Using an electric drill, drill two holes no
larger than the anchor.
• Insert the anchors into the holes.
• Align the bracket (B) with the holes (make
sure the notch in the bracket is facing
down) and secure to the wall using the
screws.
• Attach the fixture (A) to the bracket and
secure using the two screws removed in
Step 1.
• Switch the lamp on to the desired setting
(Low or High).
1. Locate the operation switch on the
bottom of the fixture (A).
2. Turn the operation switch to the Low
or High position according to your
preferences:
Low = Softer light and longer duration
High = Brighter light output
The solar Lamp will automatically operate
at dusk.
The warm white LEDs will remain lit
throughout the night. When motion is
sensed the bright white LEDs will illuminate
and remain lit for 15 seconds.
Replacement Parts
Replacement Batteries are available at
www.gamasonic.com or via our Toll Free
number: +1-800-835-4113.
Your Lamp uses the following battery:
GS32V15
