page 3
1. Detach the upper part of the lamp
as shown in Fig. 1 by turning it
counterclockwise.
2. Turn ON the operation switch (see Fig. 2.)
by choosing your desired brightness level:
LOW - last longer using dimmer light.
HIGH- Brighter light output.
3. Reassemble the upper part of the lamp by
placing it on top of the 4 hinges, and then
turn it clockwise.
4. Install the lamp onto your existing 3” post,
using the screws provided (Fig. 3.).
5. Screw in the acorn finial on top of the
lamp (Fig. 4.).
The Solar LED Bulb is designed to last up to
10 years, however if it is not working, or if you
want to use a different color temperature
bulb, you can replace it with a new GAMA
SONIC Solar LED Bulb.
1. Detach the upper part of the lamp
as shown in Fig. 1 by turning it
counterclockwise.
2. Make sure the operation switch is in the
OFF position.
3. Remove the existing bulb by turning it
counterclockwise Fig 5.
4. Install the new GS Solar LED Bulb by
turning into the bulb socket clockwise.
5. Reassemble the unit by reversing the
above procedure
operation Instructions
replacing the Solar led Bulb
Charging & duration Chart
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Operation
Switch
Charging Time Duration High Mode
Duration Low Mode
3 Hours
Approx. 10 hours
Approx. 20 hours
6 Hours
Approx. 20 hours
Approx. 40 hours
